• ROPS/FOPS tested, sound proofed, low-vibration, comfortable cabin with 360-degree all-round visibility and colored full-glazing.
• Windshield wipers in front and rear, with intermittent wipers in front, indicator reset
• Indicator for interior cab lighting, door divided, upper door section adjustable to two positions by 180°
• Solid panoramic front windshield without a transversal spar for optimal visibility
• Rear window can be opened
• Hanging pedals and removable floor mats
• Mechanically-sprung comfort operator’s seat Grammer MSG85/721
• Electronically pilot-operated multifunctional joystick with integrated travel direction selector and telescopic function
• Color-coded switches for hydraulic, electric, driving, and safety features
• Heater with 3-speed fan, 4 air vent and defroster nozzles
• 12 V socket
• Bottle holder, sun blind, storage compartment under the operator's seat, clothing hook
• Work lights 1x LED Basic on front (1000 lm), work light 1x LED Basic on rear (1000 lm)
• Lighting according- road traffic regulations

• Gear pump with load pressure independent flow distribution (LUDV)
• 4 steering modes incl. electric changeover and automatic synchronization as standard
• 3. Control circuit and telescopic function with proportional control
• Permanent function 3. Control circuit can be switched on via keypad
• Overload and "Smart Handling" driver assistance system (manual mode, bucket and stacking mode)

• Coarse-mesh, horizontal combination cooler for engine water, hydraulic oil and charge air
• Reversible fan incl. automatic function
• Cyclone air filter with integrated safety cartridge and pre-separator
• Manual battery disconnect switch

• Stepless, hydrostatic transmission with load-dependent, electronic transmission control
• Maximum speed 40 km/h
• Temporary reversing warning device
• Mechanical parking brake

• Torsion-resistant steel frame in box profile design
• Telescopic arm guided by 13 sliding elements, adjustable from outside
• End position damping in the telescopic cylinder

• Operator's manual, service manual

• Cab window right and rear, heated with automatic shut-off
• Air-conditioning system 
• Interior mirror, including bracket for cell phone (CCA_PHONHOLD_002)
• Mechanically sprung operator's seat with fabric cover (MSG85/721) - (standard)
• Air-sprung operator’s seat (MSG95AL/722)
• Adjustable steering column (height and incline)
• Radio-ready (antenna, speaker)
• Radio system DAB+ with BT + hands-free installation (radio, antenna, speaker)
• 7” inch display (incl. oil volume adjustment, sensitivity of the joystick)
• Rear-view camera 
  • only in association with
    • Display 7 inch inc. Oil volume adjustment and sensitivity of the loading system
• Front view camera right side

• (Orange) LED rotating beacon
• LED Basic work light (1000 Lumen)- 1x additional unit on front, 1x unit on rear 
• LED Basic lighting package (1000 Lumen) - 7 additional work lights - 1x front, 1x rear, 1x left, 2x right, 2x outer arm
• 2x LED Basic work light (1000 Lumen) on side of telescopic arm (outer pipe)
• Additional lighting LED Basic rear (1000 Lumen)

• Data confirmation (ABE) for self-propelled work machine* - (standard)
• EC certificate of conformity for tractors (167/2013/EC - Class T1), without data confirmation
• EC certificate of conformity for tractors (167/2013/EC - Class T1), with data confirmation - only for Germany

*Germany, Luxembourg, Netherlands, Austria, Slovakia, the Czech Republic, Switzerland, Estonia, Latvia, Lithuania, Hungary

• Four type of steering - (standard)
• Hydrostatic 20 km/h
• Hydrostatic 30 km/h
• Hydrostatic 40 km/h - (standard)
• Hydrostatic 40 km/h incl. reduction in rpm Smart Driving
• Driving mode Power, Eco - (standard)
• Driving mode Power-, Eco,- Pedal-/CSD
  • includes:
    • Low-speed device and hand throttle
• Preliminary vacuum filter
• Cyclone pre-filter
• Cyclone pre-filter Turbo III
• Reverse fans incl. automatic function
• 100% differential lock in the front axle - connectible
• Pre-heating of coolant, fuel, hydraulic oil
• Automatic stop (Engine off through seat contact switch)

• Mitas 340/80-20 MPT-01 - Traction profile - ET10
• Mitas 405/70-20 MPT 01 - Traction profile - ET35
• Mitas 405/70-24 MPT 01 - Traction profile - ET50
• Michelin 400/70 R20 XMCL - Traction profile - ET50
• Michelin 400/70 R24 XMCL - Traction profile - ET50
• Mitas 340/80-20 (12.5-20) MPT-04 - Construction machine profile - ET10
• Michelin 400/70R20 BIBLOAD - Multi-purpose profile - ET50
• Firestone 400/70 R20 Duraforce Utility - Multi-purpose profile - ET50
• Alliance 400/70 R20 Multiuse 550 - Municipal profile - ET50
• Trelleborg 400/70R20 TH400 ET+50
• Trelleborg 400/70R20 TH500 ET+50
• Trelleborg 400/70R24 TH400 ET+50
• Trelleborg 400/70R24 TH500 ET+50

• Load stabilizer (vibration damper) incl. automatic function
• Automatic bucket return (ABR), including vibration function of the tipping cylinder
• Tipping cylinder lock
• Telescopic arm dirt wiper
• Mechanical quick coupler system, Kramer System (Telescopic “small” - pivoting angle 132°) - (standard)
  • Not with:
    • Pressure release of 3rd control circuit
• Hydraulic quick coupler system, Kramer System (Telescopic “small” - pivoting angle 132°)
• Hydraulic quick coupler system, Kramer System (Telescopic “small” - pivoting angle 150°)
• Fully hydraulic quick coupler system “Smart Attach”, Kramer System (Telescope “small” - pivoting angle 150°)
  • only in association with
    • Pressure release of 3rd control circuit
• Hydraulic quick coupler system, Weidemann System (pivoting angle 150°)
• Hydraulic quick coupler system, EURO System (pivoting angle 150°)
• Hydraulic quick coupler system, Manitou System (pivoting angle 150°)
• Hydraulic quick coupler system, Matbro / John Deere System (pivoting angle 150°)
   

• Filling of the hydraulic system with environmentally-friendly hydraulic oil PANOLIN Synt46
• Oil volume adjustment for hydraulic additional control circuits
  • included in:
    • Display 7 inch (incl. oil volume adjustment and sensitivity of the loading system)
• Pressure release of 3rd control circuit
• Unpressurized return line, on the outer arm, incl. overflow oil line
• Reversing valve in front on 3rd control circuit
• Tipper connection
• Three-point lifting unit, category II 
• Rear power take-off 540 rpm
  • only in association with
    • Three-point lifting unit, category II 
    • Automatic attachment coupling 38 mm - fixed to frame
• Control circuit, rear attachment, double-acting
  • only in association with
    • Tipper connection

• Plug receptacle for front attachments, 7-pole
• Outlet for rear attachments, 7-pole

• Temporary reversing warning sound - (standard)
• Reverse alarm (acoustic)
• Drive train cover 
• Underbody protection
  • only in association with
    • Drive train cover 
• Immobilizer system, integrated in the ignition switch key
• Fire extinguisher (2 kg)
• Protective grating for front windshield, removable (not approved for machine travel on public roads)
  • not in conjunction with:
    • Red/white warning stripes (in accordance with DIN 30710)
• Red/white warning stripes (in accordance with DIN 30710)
  • Not with:
    • Protective grating for front windshield, removable (not approved for machine travel on public roads)
• Seatbelt alarm
• CESAR DataTag ID - Only for countries that use this system within their legal institutions, such as Great Britain

• Single-color RAL customized paint finish (gray parts not included)*
• Protective measures for use in aggressive materials (salt and fertilizer use)
  • only in association with
    • Dry lubrication (smooth paint) Telescopic arm
    • Telescopic arm dirt wiper
    • Cover for the drive train
• Dry lubrication (smooth paint) Telescopic arm (not for AUS/NZ)
• (Fully automatic) central lubrication unit
• Central lubrication system (aggressive media)
  • only in association with
    • Protective measures for use in aggressive materials (salt and fertilizer use)
    • Dry lubrication (smooth paint) Telescopic arm (not for AUS/NZ)
    • Telescopic arm dirt wiper
    • Cover for the drive train
• Re-configured central lubrication system (lubrication line positioned in the arm)
• EquipCare Dual ID
• Dynamic weighing system
  • only in association with
    • Load stabilizer (vibration damper) incl. automatic function
    • 7” inch display (incl. oil volume adjustment, sensitivity of the joystick)
    • In addition, one of the following quick hitch systems must be selected:
      • Kramer hydraulic 150°, Kramer Smart Attach 150°, EURO
      • Recommended: only in combination with central lubrication system!

*We reserve the right to decline paint finishes that exhibit similarities to protected colors or color combinations of other manufacturers!